Flipper Devices opened the Kickstarter campaign for Flipper One on 17 November 2026. The device is a pocket Linux computer aimed at network testing and hardware work. The public tier costs $399, the campaign closes on 17 December 2026, and the company estimates shipping for July 2027.
What happened
Flipper One has been developed in the open since the company first showed it earlier this year. The crowdfunding page is now live. People who bought the $20 pre-order coupon get the device for $379, and everyone else pays $399. The box holds the device and a USB-C cable. Expansion modules cost extra: a LoRa module ($59), a software-defined radio module ($149) and a 5G modem ($219).
Flipper says the first batch is sold at roughly cost, because memory and UFS storage now make up more than half of the hardware bill.
What the device is
This is a different product from Flipper Zero and it does not replace it. Flipper One has no NFC, RFID or sub-GHz radio. It works on IP networks and runs Linux applications.
The main specs, from the published Flipper One tech specs and the campaign:
- Rockchip RK3576 with eight cores (four Cortex-A72 and four Cortex-A53) and an NPU rated at 6 TOPS
- a separate Raspberry Pi RP2350 microcontroller that drives the screen, buttons, LEDs, power and boot settings, so the device stays usable when Linux is off or broken
- 8 GB LPDDR5 in the campaign spec and 64 GB UFS 2.2 storage
- Wi-Fi 6E on a MediaTek MT7921AUN chipset (2.4, 5 and 6 GHz, 2x2) with Bluetooth 5.2
- two 1 Gbit/s Ethernet ports
- HDMI 2.1 and DisplayPort Alt Mode over USB-C, both up to 4K at 120 Hz
- an internal M.2 Key B slot with PCIe, USB and SATA, plus a SIM slot and eSIM
- a 24 Wh battery
The software is Flipper OS, a Debian-based system with switchable profiles such as router, radio lab, desktop and TV box.
What it does on a network
Flipper lists up to five uplinks with routing, failover, load balancing, firewall rules and VPN tunnels. The device can be a Wi-Fi client and a hotspot at the same time. With two wired ports it can sit inline between two devices to watch traffic. A built-in scanner maps hosts, open ports and services, and a passive mode is meant to flag attacks and odd activity on the network.
Monitor mode is supported on the Wi-Fi chipset. Flipper names packet injection as a requirement for its Wi-Fi tooling, but the company has not confirmed that it works yet, so treat it as planned. The eSIM only becomes useful once the 5G modem module is fitted. One USB-C cable carries both charging and an SSH console.
How open is it
Flipper works with Collabora to get the RK3576 supported in the mainline Linux kernel instead of Rockchip's own vendor kernel. The mainline status page says mainline Linux mostly works on the chip. The NPU, hardware video encoding, the CSI camera interface and PCIe suspend are still missing. OP-TEE has no RK3576 support yet, and Rockchip's stock boot chain still includes a binary-only DDR memory trainer. Calling the device "blob-free" is a goal, not where things stand today.
What security teams should keep in mind
- It is a crowdfunding pledge. Hardware is not shipping yet, July 2027 is an estimate, and specs such as RAM may still change before production.
- Separate features that ship from features that are planned. Before you count on wireless testing, check that injection and other advanced Wi-Fi features are working.
- Set a policy before units arrive. A pocket device with two Ethernet ports, a 5G modem and Wi-Fi monitor mode can bridge or sniff a network from a desk drawer. Decide who may bring one onto corporate networks, under what written authorisation, and how your network access control would spot an unknown inline device.
- Use it only on networks you are authorised to test. Scanning or sniffing someone else's network can be illegal, whatever the tool.
A gadget like this is good at mapping a network you can plug into. Seeing what your organisation exposes to the internet is a separate job. That is the gap Attack Surface Management covers: our team continuously discovers internet-facing hosts, subdomains and services so forgotten assets get found before someone else maps them.
